Figure 17 Web interface, Measurements
(Home) view
5.2.1 Connecting to web interface
Computer with:
• RJ45 Ethernet connector
• Web browser, for example, Firefox, Chrome, or Safari. Using the most recent
version is recommended.
1. Connect your computer to the same network as the transmitter. If you are connecting the
transmitter directly to your computer, connect the Ethernet cable from the transmitter to
the computer.
For a direct connection between the transmitter and your computer to work,
also make sure that the devices are in the same subnet and that your
computer has a static IP address.
2. Power up the transmitter.
Powering up takes some minutes.
3. Select the configuration menu symbol at the upper right corner of the touchscreen.
4. In Transmitter > Network, configure the network connection. If you have already
configured the network connection, you can move to step 5.
Chapter 5 – Start-up
39
To Next Page
Loading...
