Vaisala Indigo 520 - Figure 22 Analog Outputs Configuration Menu on Touchscreen, General Tab Active

3
2
1
Figure 22 Analog outputs configuration menu on touchscreen, General tab active
1 The General tab contains the settings that are common for all analog output channels.
2 The Output 1 … 4 tabs contain individual settings for each analog output channel.
3 A circle next to the channel name indicates that the channel is on.
1. Select the configuration menu symbol at the upper right corner of the touchscreen.
2. Select Outputs > Analog outputs.
3. In the General tab, define the settings that are common for all analog outputs:
a. In Output mode, select the current or voltage range for the outputs.
b. In Error output, define the output level indicating that the device is in error state or
that the measurement outside the defined measurement scale.
4. In the tabs Output 1 … 4, select the output channel you want to configure.
Indigo 520 User Guide M212287EN-A
50