Vaisala INTERCAP HMDW80 Series - Figure 27 Filter Removed; Figure 28 Sensors on HMS82;83 Models

Chapter 4 _______________________________________________________________ Maintenance
VAISALA ________________________________________________________________________ 39
7. Open the filter to expose the sensors.
1305-017
Figure 27 Filter Removed
8. Pull out the old INTERCAP
®
sensor, and insert the new one.
1305-024
Figure 28 Sensors on HMS82/83 Models
1
=
Vaisala INTERCAP® humidity sensor.
Handle by the plastic frame.
2
=
Temperature sensor. Do not touch or attempt to remove.
3
=
Sensor socket.
4
=
Transmitter probe.
9. Insert the new filter.
10. Reassemble, remount, and reconnect the transmitter.
11. Power up the transmitter.
12. Verify that the transmitter now provides a valid humidity reading.
1
2
3
4