Vaisala MAWS101 - Using MAWS Terminal Software; Selecting the Language; Figure 99 COM0 Pins for the Terminal Connector; Figure 100 Select Language Window

Chapter 4 _________________________________________________________________ Operation
VAISALA _______________________________________________________________________ 105
0201-045
Figure 99 COM0 Pins for the Terminal Connector
Using MAWS Terminal Software
Selecting the Language
When you start MAWS Terminal for the first time, you will be asked
to select the language you would like to use. The Select Language
window, presented in Figure 100 below, will appear. Select the
desired language and click OK.
Figure 100 Select Language Window
The Select Language window will only appear when MAWS
Terminal is started for the first time. To change the language later,
choose Preferences from the Settings menu, and then select the
Language tab. In the Language tab, select the desired language from
the Available Languages box and click OK.