User's Guide _______________________________________________________________________
24 ___________________________________________________________________ M210243en-A
0201-004
Figure 4 QML102 Logger without the Cover
The following numbers refer to Figure 4 above.
1 = Internal battery
2 = Reset button
3 = Status LED
Memory Expansion Board
(Optional)
The QML102 logger can be equipped with QMC102 Memory
Expansion Board. This module uses the standard Compact Flash
memory cards for logging a large amount of data. Additionally,
QMC102 contains 512 kB extra RAM memory, which may be needed
in systems with the large configuration due to, for example, extensive
statistical calculations or large set of sensors connected to MAWS.
To Next Page
Loading...
