Vaisala MAWS101 - On DKP12; Figure 45 Maws101 Fixed to the Pole with Clamps

Chapter 3 ________________________________________________________________ Installation
VAISALA ________________________________________________________________________ 59
The MAWS101 delivery includes an installation arm and four clamps
for fixing the arm to a pole mast. There are two sets of clamps
included: one for 60 mm diameter pole and one for 100 mm diameter
pole. The smaller clamps are intended for use with the 2-meter high
DKP102 mast. Use the QMW101 wind sensor with the DKP102 mast.
9906-025
Figure 45 Maws101 Fixed to the Pole with Clamps
On DKP12
Another option is to use the 10-meter high DKP12 mast. Install the
arm to the DKP12 mast with the large clamps. Use the wind sensor
QMW110 because it includes a 10 meter cable. Fix the upper tube
with the wind sensor to the top part of the mast with the smaller
clamps (see Figure 46 on page 60).