VAMP 52 - Page 163

Technical description 5 Control functions 5.7 Auto-reclose function
(
79
)
VM50.EN004 VAMP 24h support phone +358 (0)20 753 3264
163
Parameter Value Unit Default Description
Shot settings
DeadT 0.02 … 300.00 s 5.00
The dead time setting for this
shot. This is a common setting
for all the AR lines in this shot
AR1 On; Off - Off
Indicates if this AR signal
starts this shot
AR2 On; Off - Off
Indicates if this AR signal
starts this shot
Start1 0.02 … 300.00 s 0.02
AR1 Start delay setting for this
shot
Start2 0.02 … 300.00 s 0.02
AR2 Start delay setting for this
shot
Discr1 0.02 … 300.00 s 0.02
AR1 Discrimination time
setting for this shot
Discr2 0.02 … 300.00 s 0.02
AR2 Discrimination time
setting for this shot