Calibration
Calibration log
Description
During each calibration a log le is created.
Information of the progress of the calibration will be written in this le.
You’ll nd the le in the LOG carpet.
His name is made of:
●
FRIprex
●Unit serial number
●Date of the download.
Example of the content of the LOG carpet LOG after service data download:
Content of the log le
●Calibration full start and end date
●Description of the result of each step
●Remaining time (in seconds)
●The calculated calibration value and the average measured temperature.
●Calibration progress: Finished, stopped
IX.19
v03 • July-2016 • Hen
Heating system module
Line Units Serial number (starting from) Sw Revision
VCCM
VCCWE
All ExxXH1009xxxxxxx 01-01-02
01-02-02
To Next Page
Loading...