VarioCooking Center 211 - Description of the Service Mode

Service mode
Plan of the mode
Button Function Button Function
Basic settings
Basic unit settings Telephone ●Customer service telephone
number
●Chef's telephone number
1st start-up
conguration
●Initialisation of the altitude
setting
● Initialisation of the guarantee
form
Parameters
●Altitude
●VarioDose
●Hot water
Hardware
●Type of actuators
Function
test
Access to the components test
menu
Heating
Activation of heating zones, or
the ceramic hob
Movements
Activating the actuators or
motors
Solenoid valves
Activation of solenoid valves
Allocation
Allocation of thermocouples to
heating zones
Calibration
Calibration of all thermocouples
Conguration
Advanced conguration of the
unit. Consult the manufacturer or
his legal representative.
Operating mode conguration
For more information on the user menus refer to the user manual.
A full description of the service mode is available in the service mode chapter.
IV.05
v03 • July-2016 • Hen
Service Mode Module
Line Units Serial number (starting from) Sw Revision
VCCM
VCCWE
All ExxXH1009xxxxxxx 01-00-08