VAT 61228-KAGG-0002 - Page 70

MAINTENANCE
Series 612
70/83
Edition 2013-04-12
601894EA
7.2.2.3 Needed tools
Pozidriv screw driver size 1
Open end wrench 4.5mm
Description
Required tool
1. Remove the panel screws.
Pozidriv screw driver
size 1
2. Remove female screw locks from
POWER, SENSOR and INTERFACE
connectors.
Open end wrench 4.5 mm
3. Lift the panel carefully.
4. Disconnect fan cable from board.