9. Installing Software
Green X / X18
(Model: PHT-75CHS) Installation Manual 117
9.5.3 Initiating the Imaging Program
To initiate the imaging program in EzDent-i:
1. Click the ACQUISITION tab. The imaging mode selection menu appear
s in the left pane (see below).
The imaging mode selection menu may differ due to your
equipment’s option (CEPH or non-CEPH) or the Display
option you selected in the setting menu.
2. Select an imaging mode from the menu. Based on your selection, the
console software window appears.
To Next Page
Loading...
Need help?
General
