Vatech Green X - Installing the X-ray Unit: Base Stand Type; Attaching the Base to the X-ray Unit

4. Installing the X-ray Unit: Base Stand Type
Green X / X18 (Model: PHT-75CHS) Installation Manual 39
English
4. Installing the X-ray Unit: Base Stand
Type
4.1 Attaching the Base to the X-ray Unit
If you are installing the X-ray unit on a concrete floor, first
complete the steps in 4.4.1 Concrete Floor.
To attach the base to the X-ray unit:
1. Remove the lower carrying handle.
Required Tool Allen Wrench 6 mm / 0.24”