Vatech Green X - Page 133

9. Installing Software
Green X / X18 (Model: PHT-75CHS) Installation Manual 125
English
9.5.6 Selecting an Announcement Mode: Music or Beep (Optional)
If selecting an announcement between music and beep is necessary, perform the
following procedures.
Command specifications:
Command format: [SPM_MPOP_XXXX]
XXXX Imaging Modes
Announcement
Mode
Division
0000
CT/PANO
Music
Different for each mode
0001
CT/PANO
Music
Same for each mode
0002
(Default)
CT/PANO Beep Same for each mode
Send the command by the command specification in the table above.
An example is Default mode: 0002(beep) for each imaging mode.
< When the same Music Announcement is desired for CT and PANO imaging
modality >
Enter the command [SPM_MPOP_0001] in the command field.
< When the same Beep Announcement is desired for CT and PANO imaging
modality >
Enter the command [SPM_MPOP_0002] in the command field.