4. Installing the X-ray Unit: Base Stand Type
44 Green X / X18 (Model: PHT-75CHS) Installation Manual
6. Tighten three wrench bolts in the column’s backside to attach the base.
Required Tool Allen Wrench 6 mm / 0.24”
Parts and
Accessory
Wrench Bolt
M10 x 25 w/ Spring
and Flat Washers -
3 pcs
(Part No. 23)
All wrench bolts inserted in steps 4 and 6 must be fully
tightened before starting the next step.
To Next Page
Loading...
