ITNLPL FRES ENG DE
www.vdocyclecomputing.com MC 2.0 WL
After pairing the cadence transmitter, the current
cadence is shown in area of the display. In
function mode, the cadence information can
be accessed by pressing the button P/CAD
P
.
Resetting the trip data also resets the cadence
data to zero.
3.4 Cadence option >>> P06
The cadence menu is only available if
B
the cadence transmitter has been installed.
B
the cadence transmitter has been selected
(see transmitter selection in sections . and .).
B
the transmitter was paired during pairing.
Note: the heart rate and cadence cannot be received simultaneously.
CALORIES: shows the calories burnt on the current
trip (since the last reset).
TIME BELOW: shows the time during which the
heart rate was below the lower limit set for the
training zone.
TIME IN: shows the time during which the heart
rate was within the set training zone.
3.5 Information functions, PULSE
This information is only available if the PULSE transmitter has
been selected and paired.
AVG PULSE: shows the average heart rate for the
current trip (since the last reset).
MAX PULSE: shows the maximum (highest)
heart rate for the current trip (since the last reset).
To Next Page
Loading...
Need help?
General
