VDO MC 2.0 WL - Automatic Altitude Adjustment During Bike Transport; Setting the Altitude Gain Uphill

MC 2.0 WL VDO CYCLECOMPUTING
DE ENG FR ESIT NL PL
If AIR PRESSURE is selected:
AIR PRESSURE--SET PRESSURE appears on the
display. The air pressure number flashes.
Press ALTI
A
to reduce the value or
P
to increase
it. Once you have set the correct value, press
M
to
confirm your setting.
Dimension of Air Pressure is hPa.
AIR PRESSURE--SET OK?
Press
M
in confirmation.
The MC . confirms by displaying ACTUAL ALTI--SET DONE.
To exit settings mode, press and hold the
C
button for three seconds.
CLOSE SETTING flashes. The MC . switches back to function mode.
6.12 Adjusting the altitude when transporting the bike
6.13 Setting the altitude gain uphill
The MC . has a movement sensor. If the bike is transported with
the MC . (e.g. by car), the movement sensor will adjust the current
altitude if the air pressure changes during transportation.
The altitude gain uphill can be separately set for BIKE  and BIKE .
Before the start of the season, you can reset the total altitude gain
to zero.
ATTENTION: the total altitude gain is SAVED when the battery is
changed. The data is not lost.
To do this, the MC . WL must be positioned in the handlebar bracket.
Process:
Press and hold
M
for three seconds. SETTINGS--OPEN? flashes.
LANGUAGE---SELECT---appears on the display.
Press
P
to scroll to ALTI UP---SET---.
Press
M
in confirmation.