ITNLPL FRES ENG DE
www.vdocyclecomputing.com MC 2.0 WL
Table of contents
1. Display 42
2. Operation 44
3. Functions 46
. Information functions, BIKE
. Information functions, ALTI
. PULSE option
. CADENCE option
. Information functions PULSE
. Information functions CADENCE
. Selection of BIKE or BIKE
. Pairing of transmitters, selecting the transmitters
. Display backlight
. Selecting an HR training zone
. Selecting the start altitude /
recalibrating the current altitude
. Auto-starting/stopping the computer
. Starting/stopping the stopwatch
4. Reset 56
. Resetting the trip data
. Resetting the stopwatch
. Resetting the NAVIGATOR
.. Resetting to factory settings
5. Installation 57
. Fitting the transmitter, magnet and handlebar bracket
. Installing the battery in the computer
. Inserting the computer into the handlebar bracket
6. Basic settings 59
.. Selecting the language
. Setting the units (kmh/mph, Meter/feet,
Celsius/Fahrenheit, KG/LBS)
. Setting the tyre size
. Setting personal data
. Selecting the transmitter (PULSE or CADENCE or NONE)
.. Setting the clock
.. Setting the odometer
.. Setting the navigator
.. Setting the ride time
. Setting the start altitude/home altitude
. Setting the current altitude/actual altitude
. Automatic altitude adjustment during bike transport
. Setting the altitude gain uphill
. Setting the altitude loss downhill
. Setting the beeper
7. Sleep mode 73
8. Terms of guarantee 74
9. Troubleshooting 75
10. Technical specifications 77
>>> P02 references at the start of a section refer to the pictures in the
picture book!
To Next Page
Loading...
Need help?
General
