MC 2.0 WL VDO CYCLECOMPUTING
DE ENG FR ESIT NL PL
10. Technical specifications
Error Possible cause Correction
No heart rate displayed Heart rate sensor has not been selected. Select the heart rate sensor from the sensor
selection area
No heart rate displayed Heart rate sensor has not been paired Select the heart rate sensor, correctly
position the heart rate chest belt on your
body. Insert the computer into the handle-
bar bracket, heart rate symbol flashes to
indicate pairing
No heart rate displayed Battery in the heart rate chest belt is dead Replace the battery in the heart rate chest
belt
No cadence displayed Cadence sensor has not been selected. Select the cadence sensor from the sensor
selection area
No cadence displayed Cadence sensor has not been paired Select the cadence sensor. Insert the
computer into the handlebar bracket,
cadence symbol flashes to indicate pairing
No cadence displayed Battery in the cadence chest belt is dead Replace the battery in the cadence chest
belt
No cadence displayed Magnet incorrectly positioned Correct the magnet position
No cadence displayed Magnet positioned too far from the
transmitter
Move the magnet or the transmitter to
reduce the distance
Cadence display doubled Magnet incorrectly positioned Correct the magnet position
To Next Page
Loading...
