VDO MC 2.0 WL User Manual

ITNLPL FRES ENG DE
www.vdocyclecomputing.com MC 2.0 WL 
A
= ALTI
In function mode:
B
Altitude information is displayed.
B
If the submenu is open:
Scroll down in the submenu.
B
Press and hold ALTI for three seconds:
Opens the menu for recalibrating the current altitude.
In setting mode:
B
Scroll down within the setting modes.
B
Decrease a digit.
P
= P/CAD
In function mode:
B
Displays the heart rate information and the stopwatch
(if heart rate has been paired).
B
Or:
Displays the cadence information and the stopwatch
(if cadence has been paired).
B
If the submenu is open: Scroll up in the submenu.
B
Press and hold HR/CAD for three seconds:
Opens the menu for selecting the heart rate training zone
(if heart rate transmitter has been paired).
In setting mode:
B
Scroll up within the setting modes.
B
Increase a digit.
= BIKE
B
Displays the bike functions, e.g. trip distance, average speed etc.
+
M
= BIKE+MENU
B
Press the buttons BIKE+MENU (hold for three seconds) to open
the menu for selecting the transmitter for heart rate or cadence.
A
+
P
= ALTI+P
B
Press the buttons ALTI+P to start/stop the stopwatch.
B
The stopwatch immediately appears on the display and
is started or stopped.
+
C
= BIKE+CLEAR
B
Press the buttons BIKE+CLEAR to activate the display backlight.
B
When the display backlight is activated, the LIGHT icon is
displayed.
B
When the display backlight is activated, the display is lit for a few
seconds every time a button is pressed.
ATTENTION: press the buttons BIKE + CLEAR again to switch off the
display backlight during the day.
This SAVES BATTERY POWER.

VDO MC 2.0 WL Specifications

General

Brand	VDO
Model	MC 2.0 WL
Category	Bicycle Accessories
Language	English