24 DSGH Installation and Operation Guide
Introduction
Customer Service
U.S. and Canada
On-site field service is available in many locations. Often, a field service
engineer is at your plant for your gauge’s startup. Field service engineers
also provide assistance by phone during office hours.
For emergencies (example: line shut down because of VEGA equipment),
you can reach us 24 hours a day.
Worldwide
Contact your local VEGA representative for parts, service, and repairs.
Have this information ready
VEGA Customer Order (C.O.) Number
Located on the source holder’s engraved label
Sensor‘s serial number
Located on the gauge’s housing inside the external housing
Table 1.2
Contact information
Tel (Monday – Friday 8:00 A.M. – 5:00 P.M. EST) +1 513-272-0131
Tel (emergencies: follow the voice mail instructions) +1 513-272-0131
Fax +1 513-272-0133
Field service e-mail fieldservice@vega.com
To Next Page
Loading...
