68 DSGH Installation and Operation Guide
Advanced functions
Type
The GEN2000 level and density gauges look similar and use the same
software. If your density transmitter indicates Level, it was set incorrectly for
a density application.
Procedure 4.10: To select the transmitter’s type
Location
The local transmitter refers to a gauge that has its sensor electronics and
processing electronics all contained in the same housing.
Set a gauge to Remote if the sensor electronics and processing electronics
are in separate housings and the process signal connects to the auxiliary
input of the processing electronics.
Procedure 4.11: To select the transmitter’s location
1. Select Setup | Gauge Setup | Gauge Type.
2. Select Density.
1. Select Setup | Gauge Setup | Transmitter Location.
2. Select Local or Remote.
To Next Page
Loading...
