DSGH Installation and Operation Guide 55
Advanced functions
C HAPTER
4
Chapter 4ADVANCED FUNCTIONS
Functions not required for normal operation of the gauge are in the
Ohmview2000 software under the Diagnostics and Gauge Info tabs. These
functions are primarily for use by VEGA personnel for advanced
troubleshooting and repair.
Process chain
The process chain is a description of the gauge software’s calculation of a
density measurement from a radiation reading. In the Process Chain tab,
you can view intermediate values of the calculation to verify proper
functionality of the software.
Note: VEGA strongly recommends that you ask our advice before
using any advanced function.
To Next Page
Loading...
