DSGH Installation and Operation Guide 1
Revision history
Copyright
©
2015 VEGA Americas, Inc., Cincinnati, Ohio. All rights reserved.
This document contains proprietary information of VEGA Americas, Inc. It shall not be
reproduced in whole or in part, in any form, without the expressed written permission
of VEGA Americas, Inc.
The material in this document is provided for informational purposes and is subject to
change without notice.
GEN2000
®
is a registered trademark of the VEGA Americas, Inc. VEGA View and
Ohmview 2000 are trademarks of VEGA Americas, Inc.
HART
®
is a registered trademark of The HART
©
Communication Foundation.
ISO 9001 approval by Lloyd's Register Quality Assurance Limited, to the following
Quality Management System Standards: ISO 9001:2008, ANSI/ASQC Q9001-2008,
Approval Certificate No. 107563.
VEGA Americas, Inc.
4170 Rosslyn Drive
Cincinnati, Ohio 45209-1599 USA
Tel: +1 513-272-0131
Fax: +1 513-272-0133
Website: www.vega.com/us
Field service E-mail: fieldservice@vega.com
Version Description Date
1.0 Initial release. Formerly 245638-EN. 051201
1.1 Changed CD part number 32700, Corrected copyright and
registered symbols and date
061201
1.2 Electronics revision 090306
1.3 Added certification information and IECex label 090814
1.4 Changed logo, company name, and website 110301
1.5 Added excessive radiation note and changed to A5 format 130913
1.6 Updated certification information 140516
1.7 Added information about removing and replacing GEN2000
red threaded plugs. Updated certification information.
150921
Warning: To ensure CE compliance, use this equipment only in
the manner that this manual describes, per VEGA
specifications. Otherwise, damage to the unit or
personal injury may result.
To Next Page
Loading...
Need help?
General
