58 DSGH Installation and Operation Guide
Advanced functions
Gauge Information
Process Variables tab
Table 4.2
Process Variables tab — display values
Value Description
Min PV The value, in process units, as entered in the setup tab.
Use this to calculate the measurement span.
Max PV
Counts Low The temperature and sensor uniformity gain compensated
counts from the sensor at the Cal low density. Determining
the Cal low density occurs during the calibration.
Counts High The temperature and sensor uniformity gain compensated
counts from the sensor at the Cal high density.
Determining the Cal high density occurs during the
calibration.
Sensor Temp Comp
Gain
The current value of the temperature compensation gain.
Use this to adjust for inherent sensor output change with
temperature.
To Next Page
Loading...
