- check that the scale is suspended on a firm, not spring-biased construction
- the bird is moving too much, select the manual saving mode
7. The data on the display is hardly readable
- change the contrast of the display
- select display mode Large
8. The scale cannot be switched off
- hold longer than 5 seconds
9.2. PC
1. After downloading data from the scale, some files in the Scale panel are missing
- missing files are empty – they do not include any weighed values
2. After downloading data, the statistics does not show any new files or just one file
- save data in the panel Scale using the Save all weighings button
3. After downloading and saving data, the data do not display in the Statistics panel in the Last weighings
tab
- the downloaded data were weighed several days ago. Check if the data is displayed in the Weighings
panel and to view the data, use the panel Statistics, and the Selected weighings tab or panel Flocks
4. The Flocks panel, tab Current flocks, tab Statistics is empty
- check the weighing date and date of the flock start. Weighings with the dates lower than the start date
of the flock are not displayed
5. The Flocks panel, tab Selected flocks, tab Statistics is empty
- check the weighing date and date of start of the selected flocks. Weighings with the dates lower than
the start date of the flock are not displayed
6. Graph with just one point is displayed in the Flocks panel, tab Graph
- the respective flock was weighed only once. After completing further weighings (in the following
days), the graph will be displayed correctly
7. The graph in the Flocks panel does not include the option of the growth curves.
– the selected flocks do not have the growth curve preset. Complete the setting of the growth curve in
the Flocks tab, see chapter 8.7.1.
To Next Page
Loading...