Description
After the amount has been entered, and the button “Card” has been
selected the Customer can insert, tap, or swipe the card.
User Action
The user inserts, taps or swipes payment card to proceed with payment
processing.
Description
After the card is inserted, tapped or swiped, the terminal indicates that it
is processing card data, by showing “Please Wait…” screen.
User Action
The user is not required to do any action at this stage.
Description
If the CVM for the card is PIN, then the PIN will be prompted after the
“Please Wait…” screen.
If the customer has entered an incorrect offline PIN and “Enter” has
been selected, the terminal will display a warning message that an
incorrect PIN has been entered.
PIN Bypass is available for card that support both PIN and Signature CVMs.
The customer can press “Enter” without entering a PIN. If PIN Bypass is
not enabled, the “Enter” key is not enabled until 4 digits are entered
This will be displayed only for cards that use a PIN as the cardholder
verification method, otherwise the terminal will skip this screen and
move to authorisation of the card.
User Action
The user must enter the PIN and select the “Enter” button.
The user can reset the PIN entry by pressing the “C” button.
To Next Page
Loading...
Need help?
General
