Description
After the card is inserted, tapped or swiped, the terminal indicates that it
is processing card data, by showing “Please wait…”.
User action
The user is not required to do any action at this stage
Description
After the card data has been read, the device will display the message
“Authorising…”. This indicates that the device is performing online
authorisation by communicating with the acquirer’s host system.
User action
The user is not required to do any action at this stage.
Description
When card data has been authorised, the terminal will show an
“Approved” screen. This informs the customer that the payment has
completed successfully. The customer is prompted to remove the card, if
it’s still inserted. The terminal will play a notification sound until the card
is removed.
User action
The customer must remove the card.
To Next Page
Loading...
Need help?
General
