REV : 3
REV DATE : 2/21
DPN004350
Page :2 /3
UNIT MOUNTED DISPLAY
Form No.: DPN001040_REV4
PRODUCT INFORMATION
LIEBERT® iCOM™
The display will have an onboard help database. The database will provide context
sensitive help to assist with setup and navigation of the menus.
Display Setup- The user has the ability to configure the display information based on the specific user’s preference.
Language, units of measure, screen contrast, home screen layout, back light timer and the hide/show of certain
readouts will be configurable through the display.
Additional Readouts- The display has the ability for the user to configure custom widgets on the main screen.
Widget options will include items such as fan speed, call for cooling, call for free cooling, maintenance status,
call for hot water reheat, call for electric reheat, call for dehumidification, call for humidification, airflow, static pressure,
fluid flow rate and cooling capacity.
Status LEDs- The display will provide the user with the unit’s operating status using an integrated LED.
The LED will indicate if the unit has an active alarm; if the unit has an active alarm that has been acknowledged;
or if the unit is on, off, or in a standby status.
Unit Alarms – All unit alarms are annunciated through both audio and visual cues, clearly displayed on the screen,
automatically recorded in the event log, and communicated to monitoring plug connections.
Event Log – The display will automatically store the last 400 unit-only events (messages, warnings, and alarms).
Service Contact Information – The display has the ability to store the local service or sales contact information.
Upgradeable –Display and Control Board software upgrades are performed through a USB connection.
Unit-to-Unit (U2U) Communication – Communication via private Ethernet network allows for advanced control
functionality (Teamwork modes, sharing sensor data, Standby Rotation, Lead-Lag, and Cascade operation).
Temperature Control- Precision temperature control is maintained while maximizing efficiency based on a user
entered setpoint and tolerance.
Various Control Types- Proportional, PI (proportional-integral), or Intelligent control types can be selected for supply
or return temperature. These control types have been developed to maximize component life and maintain precise
environmental control.
Timers/Sleep Mode- The menus shall allow various customer settings for turning the unit On or Off.
Sensor Calibration- The menus shall allow unit sensors to be calibrated with external sensors.
Maintenance/Wellness Settings- The menus shall allow reporting of potential component problems before they occur.
To Next Page
Loading...
