REV : 3
REV DATE : 2/21
DPN004350
Page :3 /3
UNIT MOUNTED DISPLAY
Form No.: DPN001040_REV4
PRODUCT INFORMATION
LIEBERT® iCOM™
Options Setup- The menus shall provide operation settings for the installed components.
Auto Restart- The unit will return to its previous operating status after loss of power. Units can be stagger started to
minimize system current draw.
Auxiliary Boards- The menus shall allow setup of optional expansion boards.
Various Sensors: The menus shall allow setup and display of optional custom sensors. The control shall include
four customer accessible analog inputs for field-supplied sensors. The analog inputs shall accept a 4 to 20mA
signal. The user shall be able to change the input to 0 to 5VDC or 0 to 10VDC. The gains for each analog input shall
be programmable from the front display. The analog inputs shall be able to be monitored from the front display.
Diagnostics/Service Mode- The Liebert® iCOM™ control shall be provided with self-diagnostics to aid in
troubleshooting. The microcontroller board shall be diagnosed and reported as pass/not pass. Control inputs shall
be indicated as On or Off at the front display. Control outputs shall be able to be turned On or Off from the front
display without using jumpers or a service terminal. Each control output shall be indicated by an LED on a circuit
board.
To Next Page
Loading...
