Vertiv Liebert CRV Plus - Installation Tools

Vertiv | Liebert CRV+ | User Manual 16
2.2.3 Installation Tools
Listing 2.1 shows the generic toolsets and utilities used in the installation and maintenance process:
Listing 2.1
Name
Drawing
Name
Drawing
Electric hand drill Adjustable wrench
Slotted screwdriver
Cross head
screwdriver
Stepladder Forklift
Drill Wire cutting pliers
Claw hammer
Diagonal cutting
pliers
Insulating shoes Antistatic gloves
Electrician knife Cable ties
Insulating tape Insulating gloves
Crimping pliers Heat shrinkable tube
Insulated torque
wrench
To
rque screwdriver
Multimeter Clip-on ammeter
The tools mentioned in Listing 2.1 are generic and commonplace; however, depending on various factors
such as site environment, cables, installation equipment, and on-site electrical connections these tools
may vary in a real-time scenario.
Ensure that the tools used in the installation, operation, and maintenance processes are
insulated. This safety measure is important for professionals and service personnel who
work with this CRV+ range air conditioner.