Vertiv Liebert PEX4 Series - 3.5. Unit Status; 3.5.1. Temperature and Humidity Status

Vertiv | Liebert PEX4 | User Manual 69
Controller Operating Instruction
Start Password Settings: Press the Settings icon, start to enter the settings page, shown in Figure 3-18. Press
to start the password box, keyboard will pop-up, then enter the start password, if the password is correct, then
set the start pop-up box can be used and if the password is wrong, set the pop-up start boxes cannot be used.
Figure 3-18 Start Password Settings
3.5. Unit Status
3.5.1. Temperature and Humidity Status
Figure 3-19 Temperature and Humidity Status