Vertiv | SmartAisle2 | User Manual 26
Installation
2.5.1. Removing the cabinet foot
• During disassembly, multiple personnel are required to prevent severe injury or equipment damage.
Incline the cabinet to a specific angle and detach the four feet at the bottom and also remove the four dollars.
• Vertiv recommends that the cabinet is placed in a step-like edge so that the pin is floating following which
the cabinet can be disassembled without a steep angle inclination.
• Also for the air-conditioning and rack-related stu, refer to their respective user manuals.
2.5.2. Cabinet base
• During disassembly, multiple personnel are required to prevent severe injury or equipment damage.
Each cabinet will move to the base based on the layout placed in an appropriate position.
• Air conditioning and power distribution cabinets along with heavy equipment must be on the base and
finally on IT Racks.
• To reduce weight and facilitate manual operation, the front base and front-and-back doors of the cabinet
along with the side plates must be removed.
To Next Page
Loading...
