Vespa LX 50 - Page 106

Removal
- To replace the shock absorber remove the bat-
tery access flap to reach and remove the shock
absorber/ frame anchoring nut. Then remove the
shock absorber/engine anchorage nut.
- When refitting, tighten the shock absorber/chas-
sis anchoring nut and the shock absorber/engine
pin to the prescribed torque.
Locking torques (N*m)
Shock absorber/engine pin torque 33 to 41 N·m
Shock absorber/frame nut torque 20 to 25 Nm
Suspensions Vespa LX 50
SUSP - 106