Name: Vespa LX 50
Brand: Vespa
Rating: 5 (1 reviews)

To Next Page

To Previous Page

Replacement

-Remove the oil cap «A».

- Unscrew the oil drainage cap "B" and drain out

all the oil.

- Screw on the drainage plug and fill up the hub

with oil (about 85 cc)

Air filter

-Remove the cap of the purifier, unscrewing the six

clamping screws and removing the filter.

Cleaning:

-Wash with water and neutral soap.

- Dry with a clean cloth and short blasts of com-

pressed air.

-Saturate with a 50% mixture of gasoline and oil.

-Drip dry the filter and then squeeze it between the

hands without wringing.

-Let it dry and refit it again.

CAUTION

NEVER RUN THE ENGINE WITHOUT THE AIR FILTER,

THIS WOULD RESULT IN AN EXCESSIVE WEAR OF THE

PISTON AND CYLINDER.

Other manuals for Vespa LX 50

Questions and Answers:

Need help?

Do you have a question about the Vespa LX 50 and is the answer not in the manual?

General