Name: Vespa LX 50
Brand: Vespa
Rating: 5 (1 reviews)

To Next Page

To Previous Page

- Engage the spark plug with the due inclination

and screw it right down by hand, then do it up with

the wrench at the prescribed torque;

-Put the hood on the sparking plug as far as it will

go;

- Refit the central flap.

CAUTION

THE SPARK PLUG MUST BE REMOVED WHEN THE MO-

TOR IS COLD. THE SPARK PLUG MUST BE REPLACED

EVERY 5000 KM. USE OF STARTERS NOT CONFORMING

OR SPARK PLUGS NOT THOSE DESCRIBED CAN SERI-

OUSLY DAMAGE THE ENGINE.

Characteristic

Recommended spark plug

CHAMPION RN2C

Electric characteristic

Electrode gap

0.6 to 0.7 mm.

Locking torques (N*m)

Spark plug 25 - 30 Nm

Hub oil

Check

Do the following to check the correct level:

1) Stand the vehicle on the centre-stand on flat

ground;

2) Remove the dipstick «A», and dry it with a clean

cloth. Reinsert it, screwing it in all the way;

3) Remove the stick and check that the oil level is

slightly over the second notch starting from the

lower end;

4) Screw the dipstick back in, checking that it is

locked in place.

Other manuals for Vespa LX 50

Questions and Answers:

Need help?

Do you have a question about the Vespa LX 50 and is the answer not in the manual?

General