35
5 Use
Starting
4 Pre-heating
The ideal pre-heating time depends on am-
bient temperature; the lower the ambient
temperature, the longer the pre-heating time
required. See table.
• Turn the key further clockwise to the ‘
’
position.
While pre-heating takes place the preheating
indicator light will be on and the alarm buzzer
o.
• Hold the key in this position for about 6 sec-
onds.
Ambient Tem-
perature
Pre-heating time
Above + 5°C
(41°F)
about 6 seconds
+5°C to -5°C
(+41°F to +23°F)
about 12 seconds
Below -5°C (23°F) about 18 seconds
Maximum pre-
heating time
1 minute
Caution
To prevent the glow plugs from burning out,
never exceed the stated maximum pre-heat-
ing time.
3 Switching on
• Turn the start key on the instrument panel
clock-wise; the warning lights for oil pres-
sure and alternator will now light up and
the alarm buzzer will sound.
VD02056
VD02054
To Next Page
Loading...
