58
6 Maintenance
Engine oil change
Every 250 operating hours.
17 Removing the oil lter
• Unscrew the oil lter, with a commercially
available tool.
Catch any dripping oil.
• Clean the contact surface of the gasket.
• Lubricate the oil seal of the new lter ele-
ment with clean engine oil.
For oil filter art. code see page 140.
19 Oil lter installation
• Install the lter in accordance with the in-
structions printed on the lter element
housing.
Tightening torque 11 - 13 Nm (8-10 ft.lbf)
Danger
Beware of burns from hot oil.
18 Oiling the oil seal
VD00999
VD00124
VD00998
To Next Page
Loading...
