PAGE 26 VIDEONICS DIGITAL VIDEO MIXER
Seeing the Settings
The small preview screens do not show the effects of these settings. To see
the full screen picture as you change the settings, set both CURRENT and
NEXT to the source you are adjusting before you display the advanced setup
screen. You will see the effect on the OUTPUT monitor as you make adjust-
ments. You can also see the effects on the PREVIEW monitor, without dis-
turbing the output, by pressing the DISPLAY button. (These techniques are
described in more detail in Chapter 11, “Input Effects,” under the heading,
“Seeing the Settings.”)
To Next Page
Loading...
