Page 78
MNVADCJ01_1729_EN
6.7.4 Autopan
: start autopan
: stop autopan; the autopan stops at a limit switch
: store the present position as the first limit switch
: store the present position as the second limit switch
: movement towards the right
: movement towards the left
(1÷4): autopan speed from slow (X = 1) to fast (X = 4); the speed change is maintained at
the next Autopan restart.
6.7.5 Preset, scan, home
(1÷128): store the present position as preset position number X
(1÷128): movement towards previously stored preset position X
(1÷128): erase previously stored preset position X
(1÷128): slow scan towards preset position X
: movement towards the Home position
(1÷128): Home position setting from 1 to 128.
6.7.6 Sequences and Cruise
Sequences (patrol function) and the “cruise” function are defined at the OSM level. They are activated by
special codes:
(1÷4): start sequence X
: activate the cruise function.
6.7.7 Other functions
Identification text: visible, non visible
Title:
visible, invisible
: dome reset.
To Next Page
Loading...