Page 88
MNVADCJ01_1729_EN
Joystick : for shifting the cursor within the menus and for the dome movement
Special commands for some submenus, as described in the dome instruction manual:
Joystick
: zoom tele and zoom wide
e : focus near and focus far
: Home key
(1÷63): corresponding to the keys Pos1-Pos63, when a position insertion is required;
remove insertion.
6.11.4 Autopan
: start autopan
: stop autopan; if the autopan function is active the dome will not respond to other commands until it has been
stopped
: store the present position as the first limit switch
: show the position of the first stored limit switch
: store the present position as the second limit switch
: show the position of the second stored limit switch
6.11.5 Preset, home, scan
(1÷63): store the present position as preset position number X
(1÷63): erase previously stored preset position number X
: erase all previously stored preset and home positions
: movement towards the Home position
: store present position as Home position
: erase previously stored Home position
(1÷63): movement towards preset position X
To Next Page
Loading...