Vimar Eikon 20461 - Page 106

48 - ENGLISH
7.3.4
If the MASTER smart card is recognised,
the LED switches off.
7.3.6
Insert the SLAVE smart card to be pro-
grammed.
If the SLAVE smart card is not inserted within 2
minutes:
• the LED blinks yellow 3 times
• the device exits the procedure
7.3.7
When the LED turns off, the SLAVE smart
card has been programmed.
7.3.8
Remove the SLAVE smart card.
The LED turns green again, waiting for
other SLAVE smart cards to program.
To program additional SLAVE smart
cards, repeat the procedure from step
7.3.6.
7.3.5
Remove the MASTER smart card.
The LED turns green again, waiting for a
SLAVE card to reprogram.
MASTER
card
MASTER
card
MASTER
card
MASTER
card
SLAVE
card
SLAVE
card
off
green
green
off
green