Vimar Eikon 20461 - 3 Installation

ENGLISH - 5
3. Installation
Connections
• Supply voltage:
- 12 V d.c. (figure 3.1)
- 12 V~ (figure 3.2)
- 24 V d.c. (figure 3.2)
- 24 V~ (figure 3.2)
• Outputs (figure 3.3)
Note
Before completing the installation by fixing the support and
attaching the plate:
• configure the device using the dip-switches at the rear (see
the “Dip-switches” section on pg. 6)
+12 V d.c.
C
24 V~ / 24 V d.c.
8 A cos ø 1
+24 V d.c.
12/24 V~
C
3.1 3.2 3.3