ENGLISH - 7
Operation
The system has three operating modes:
Device and access control in the residential and
services sectors:
• Chapter 5
Operation without a MASTER smart card (1 level) - see
pg.8:
all enabled smart cards can be used to perform any op-
eration (initialising, programming, duplicating, cancelling,
changing the code, synchronising readers).
• Chapter 6
Operation with a MASTER smart card (2 levels) - see pg.20:
it is necessary to have a smart card programmed as a
MASTER to perform any operation (initialising, program-
ming, duplicating, cancelling, changing the code, synchro-
nising readers).
Device and access control in the hotel sector:
• Chapter 7
Operation with a MASTER smart card (2 levels) - see pg.42:
it is necessary to have a MASTER smart card to perform
any operation (initialising, programming, duplicating, can-
celling, changing the code, synchronising readers).
Use as an electronic power switch in the residen-
tial and services sectors and in the hotel sector:
• Chapter 8
Operation as an electronic power switch with a MASTER
smart card (2 levels) - see pg. 53:
it is necessary to have a MASTER smart card to perform
any operation (initialising, programming, duplicating, can-
celling, changing the code, synchronising readers).