ENGLISH - 31
6.6.4
Within 10 seconds, insert the MASTER
smart card containing the MASTER code
currently in use.
If the MASTER smart card is not inserted within
10 seconds:
• the LED blinks yellow 3 times
• the device exits the procedure
6.6 Cancelling SLAVE smart cards
This procedure can be used to cancel SLAVE smart cards,
or to cancel the slave code from a MASTER smart card. The
MASTER codes is not removed.
To carry out this procedure, it is necessary to have the MAS-
TER smart card.
6.6.3
Press the front button within 9 seconds.
The LED turns green.
Warning!
If the button is not pressed within 9 seconds, the
LED turns green and the device switches to the
“Duplicate SLAVE smart card” procedure.
Wait 10 seconds to exit the procedure. Exiting
is signalled by the LED blinking yellow 3 times.
Repeat the procedure from step 6.6.1.
6.6.1
Press the front button.
6.6.2
The LED lights up yellow.
off
yellow
MASTER
card
MASTER
card
green
yellow
green
To Next Page
Loading...