Vimar Eikon 20461 - Synchronising Readers

16 - ENGLISH
5.4.9
Remove the cancelled smart card.
The LED turns green again, waiting for
other smart cards to cancel.
To cancel additional smart cards, repeat
the procedure from step 5.4.7.
5.4.10
To exit the procedure, press the front but-
ton.
The LED blinks yellow 3 times, and then
turns off.
5.4.8
When the LED turns off, the smart card
has been cancelled.
5.5 Synchronising readers
The “Synchronising Readers” procedure configures several
different readers to work using the same smart card, the
same address and the same code.
Synchronising a non-initialised reader
5.5.1
Place dip-switch 1 on the reader being
synchronised in the ON position.
The LED lights up yellow.
Card
cancelled
Card
cancelled
off
green
yellow
1 2 3
4 5 6
7 8
ON
yellow