56 - ENGLISH
9. Installation requirements
Installation must be carried out in compliance with the elec-
trical regulations in force in the country where the products
are installed.
10. Conformity to Regulations
EMC Directive
EN 61000-6-1, EN 61000-6-3 Standards
WEEE - User information
If the crossed-out bin symbol appears on the equipment or
packaging, this means the product must not be included
with other general waste at the end of its working life. The
user must take the worn product to a sorted waste center,
or return it to the retailer when purchasing a new one. Pro-
ducts for disposal can be consigned free of charge (wi-
thout any new purchase obligation) to retailers with a sales
area of at least 400 m
2
, if they measure less than 25 cm.
An efficient sorted waste collection for the environmental-
ly friendly disposal of the used device, or its subsequent
recycling, helps avoid the potential negative effects on
the environment and people’s health, and encourages
the re-use and/or recycling of the construction materials.
To Next Page
Loading...