32 - ENGLISH
If the LED turns red, it means that a SLAVE mas-
ter card or a non-enabled MASTER smart card
was inserted.
Remove the smart card and insert the correct
one.
6.6.6
Remove the MASTER smart card.
The LED turns green again, waiting for
other smart cards to cancel.
6.6.5
If the MASTER smart card is recognised,
the LED blinks green for the remaining
time that it is left inside the reader/pro-
grammer.
6.6.8
When the LED turns off, the SLAVE smart
card has been cancelled.
If no smart cards are inserted for about 2 min-
utes, the procedure automatically terminates.
Exiting the procedure is signalled by the LED
blinking yellow 3 times.
6.6.7
Insert the SLAVE smart card to be cancelled.
MASTER
card
MASTER
card
MASTER
card
MASTER
card
red
green
green
SLAVE
card being
cancelled
SLAVE
card being
cancelled
2 minutes
green
yellow
off
To Next Page
Loading...