Vimar Eikon 20461 - Page 67

ENGLISH - 9
5.1.5
When the LED turns green (after about
10 seconds), insert the smart card to be
programmed.
5.1.6
When the LED turns off, the smart card
has been programmed.
5.1.8
To exit the procedure, place dip-switch 1 in
the OFF position.
5.1.7
Remove the smart card.
The LED turns green again, waiting for
other smart cards to program.
To program additional smart cards, re-
peat the procedure from step 5.1.5.
If no smart cards are inserted for about 2 min-
utes, the LED turns yellow and no further com-
mands are accepted.
To resume normal operation, replace dip-switch
1 in the OFF position.
off
green
green
1 2 3
4 5 6
7 8
ON
off
2 minutes
yellow