Vislink Microlite 3 - Web Page Control; Connecting to the Web Page

Operators Manual
Operation
M55-ML3-UG, Rev A 26
Figure 15: DFS Scan Feature
Figure 16: Clear channel number is displayed on the screen
8.3. Using the Web Page to Control the Microlite 3
The Microlite 3 Web page is an intuitive GUI design for ease of use. It is connected over
the Wi-Fi signal from the Microlite 3 integrated Wi-Fi antenna. All Microlite 3 parameters
may be configured via the Web page.
The name for Microlite 3 Wi-Fi (SSID) is based on the serial number. The serial number
location is located on the back of the unit opposite the User Interface. The MLT3 may be
connected to 4 devices at a time.
8.3.1. Connecting to the Web Page
Connect to the Microlite 3 Web page:
• Open the Wi-Fi option on any Wi-Fi enabled devices, such as a smartphone, tablet, or
laptop.
• Check for the serial number on the backside of Microlite 3 (for example MLT301241)
• Select the serial number under the available Wi-Fi signal list, and then click Connect
• A page opens to request credentials/password
• Enter the password: imtgonow!
• After entering the password, open a browser on your device
• Enter the URL: 192.168.1.1
• The Microlite 3 Web page opens.