EasyManua.ls Logo

Vislink Microlite 3 - Transmission Modes; Understanding Transmission Modes

Vislink Microlite 3
49 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Operators Manual
Operation
M55-ML3-UG, Rev A
28
8.3.3. Transmission Mode
There are 4 settings for MLT3 Transmissions:
• HIGH - In this mode, the transmitter is transmitting on High Power
• LOW - Transmits in Low Power
• STANDBY - In this mode, the transmitter is OFF, but the power levels are kept up so
that it could be turned ON within few seconds.
• HIBERNATE: In this mode, most of the transmitter features are turned off except for
the Wi-Fi. It requires a few seconds to transition out of the ‘hibernate’ mode.
Figure 19: Power Modes
8.3.4. Device Status
The Status Bar displays the transmitter’s operational status.
• Transmitter Status
• Band (optional)
• Frequency
• Modulation
• Video Format
• Latency
• Telemetry
• Encryption
• Temperature
• Power

Table of Contents